1. <blockquote id="se4ra"></blockquote>
    2. <source id="se4ra"></source>
    3. <var id="se4ra"></var>

    4. Welcome to: Danyang Hualong Special Steel Co., Ltd. official website
      Location: Home > Products
      Products
      Nimonic90

      Nimonic90 Aging-enhanced nickel-based superalloys

      Nimonic90Features and Applications Overview:

      The alloy is aging strengthened nickel-based high-temperature deformation of the alloy, containing a higher amount of cobalt and a variety of strengthening elements, the alloy at 815 ~ 870 ℃ high tensile strength and creep resistance, good oxidation resistance and resistance Corrosion, repeated alternating hot and cold have a higher fatigue strength and good formability and weldability. For turbine engine turbine disk, blades, high temperature fasteners, clamps, seals and flexible components.

      Nimonic90 Similar brand:

      GH90 (China)

      Nimonic90 Chemical composition: (GB / T14992-2005)
      Alloy grade
      %
      Ni
      Cr
      Fe
      Fe
      Mo
      Zr
      W
      B
      Cu
      Co
      C
      C
      Mn
      Mn
      Si
      Si
      S
      S
      P
      P
      Ai
      Al
      Ti
      Ti
      Nimonic80A
      Min
      Margin
      18.0
      15.0
      1.0
      2.0
      Max
      21.0
      1.5
      0.15
      0.02
      21.0
      0.13
      0.4
      0.8
      0.015
      0.2
      2.0
      3.0
      Nimonic90 Physical properties:
      Density
      Melting point
      Thermal conductivity
      Specific heat capacity
      Elastic Modulus
      Shear modulus
      Resistivity
      Poisson's ratio
      Linear expansion coefficient
      g/cm3
      λ/(W/m•℃)
      J/kg•℃
      GPa
      GPa
      μΩ•m
      a/10-6℃-1
      8.2
      1400
      21.76(100℃)
      225
      12.7(20~100℃)
      Nimonic90 Mechanical properties: (at 20 ℃ to detect the minimum mechanical properties)
      Heat treatment methods
      Tensile strengthσb/MPa
      Yield Strengthσp0.2/MPa
      Elongationσ5 /%
      Brinell hardness HBS
      Solution treatment
      820
      590
      8
      Nimonic90 Production standards:
      Standard
      Bar
      Forgings
      Plate (with) material
      Wire
      Pipe
      Nimonic90 Metallographic structure:

      The main strengthening phase of this alloy is γ'-Ni3 (Ti, Al), which is precipitated by square grains of different sizes in the grain. The γ 'phase of this shape can also be seen on the grain boundaries. On the chain was not continuous precipitation.


      Nimonic90 Process performance and requirements:

      1, the alloy is easy to produce in the forging when cracking, hammer to allow heavy, low temperature chamfering is not allowed. Steel ingot furnace temperature is not higher than 700 ℃, the final heating temperature 1150 ℃ ± 10 ℃, open forging temperature of not less than 1060 ℃, final forging temperature of not less than 950 ℃.
      2, the average grain size of the alloy and forging deformation degree, the final forging temperature is closely related.
      3, the alloy in solid solution can be inert gas tungsten arc welding and flash butt welding.


    5. Previous product:None
    6. Next product:None
    7. Return to
    8.  
      News Center
      Customer Service
      Copyright © Danyang Hualong Special Steel Co., Ltd. - All rights reserved
      日韩无码黄色网址_国产午夜在线网站_亚洲欧美精品一级免费看_中文字幕亚洲第一
        1. <blockquote id="se4ra"></blockquote>
        2. <source id="se4ra"></source>
        3. <var id="se4ra"></var>