1. <blockquote id="se4ra"></blockquote>
    2. <source id="se4ra"></source>
    3. <var id="se4ra"></var>

    4. Welcome to: Danyang Hualong Special Steel Co., Ltd. official website
      Location: Home > Products
      Products
      Incoloy 926

      Incoloy 926

      Incoloy 926 chemical composition

      Alloy

      %

      Ni

      Cr

      Fe

      C

      Mn

      Si

      Cu

      Mo

      N

      P

      S

      926

      Min

      24

      19

      margin

      0.5

      6.0

      0.15

      Max

      26

      21

      0.02

      2

      0.5

      1.5

      7.0

      0.25

      0.03

      0.01

      Incoloy 926 Physical properties:

      Density

      8.1 g/cm3

      Melting point

      1320-1390 ℃

      Incoloy 926 Alloy Room temperature mechanical properties:

      Alloy

      Tensile strength
      Rm N/mm2

      Yield Strength
      RP0.2N/mm2

      Elongation
      A5 %

      926

      650

      295

      35

      Incoloy 926 characteristic:

      1. It has a high resistance to crevice corrosion and can contain acid medium.
      2. In practice it has been proven that effective chloride stress corrosion cracking.
      3. All kinds of corrosion environment have good corrosion resistance.
      4. Mechanical properties than Alloy 904 L good.
      Corrosion resistance:

      926 is an austenitic stainless steel alloy with a similar 904L alloy with a nitrogen content of 0.2% and a molybdenum content of 6.5%. Molybdenum and nitrogen content greatly increased the crevice corrosion resistance. At the same time, nickel and nitrogen not only improve the stability, but also reduce the tendency to separate the nickel-based alloy from the heat-out process or the welding process over the nitrogen content. 926 has a certain degree of corrosion resistance in chloride ions due to local corrosion properties and 25% nickel alloy content. Limestone desulphurization slurry with various experiments operating at a chlorine concentration of 10000-70000 ppm, pH 5-6 and operating temperature of 50-68 ° C shows that 926 alloy has no crevice corrosion and pitting during the 1-2 years trial period. In 926 other media also have good corrosion resistance in high temperature, high concentration media, including sulfuric acid, phosphoric acid, acid gases, seawater, salt and organic acids. In addition, in order to obtain the best corrosion resistance, to ensure regular cleaning.

      Application areas:

      Alloy 926 is a versatile material that can be used in many industries:
      1. Fire system, water purification system, marine engineering, hydraulic pipe filling system,
      2. In sour gas pipes, joints, air systems,
      3. In the production of phosphate evaporators, heat exchangers, filters, mixers, etc.,
      4. In the use of sewage water cooling plant condensation and piping systems,
      5. Production of Acidic Chlorinated Derivatives Using Organic Catalysts,
      6. Production of cellulose pulp bleach
      Ocean Engineering
      9. Flue gas desulfurization system components,
      10. Sulfate coagulation and separation system,
      11. Crystal salt concentration and evaporator,
      12. Corrosive chemical shipping containers
      13 reverse osmosis desalination device.

    5. Previous product:None
    6. Next product:None
    7. Return to
    8.  
      News Center
      Customer Service
      Copyright © Danyang Hualong Special Steel Co., Ltd. - All rights reserved
      日韩无码黄色网址_国产午夜在线网站_亚洲欧美精品一级免费看_中文字幕亚洲第一
        1. <blockquote id="se4ra"></blockquote>
        2. <source id="se4ra"></source>
        3. <var id="se4ra"></var>