1. <blockquote id="se4ra"></blockquote>
    2. <source id="se4ra"></source>
    3. <var id="se4ra"></var>

    4. Welcome to: Danyang Hualong Special Steel Co., Ltd. official website
      Location: Home > Products
      Products
      Inconloy A-286 (UNS S66286)

      Inconloy A-286 (UNS S66286)
      Inconloy A-286 Features and Applications Overview:
      The alloy is Fe-25Ni-15Cr-based superalloy, adding molybdenum, titanium, aluminum, vanadium and trace boron comprehensive strengthening. Below 650 ℃ with high yield strength and long-lasting, creep strength, and has good processing plasticity and satisfactory welding performance. Suitable for the manufacture of high temperature bearing components for long-term operation of aeroengines below 650 ° C, such as turbine disks, compressor disks, rotor blades and fasteners.
      Inconloy A-286 Similar Plaques:
      GH2132 GH132 (China), ZbNCT25 (France), X5NiCrTi26-15, 1.4980, 1.4944 (Germany)
      Inconloy A-286 Chemical composition:


      Alloy
      Grade

      %

      Ni

      Cr

      Fe

      Mo

      Nb

      V

      C

      Mn

      Si

      S

      Cu

      Al

      Ti

      Incoloy A-286

      Min

      24.0

      13.5

      Margin

      1.0


      0.1







      1.9

      Maximum

      27.0

      16.0

      1.5


      0.5

      0.08

      0.35

      0.35

      0.002

      0.3

      0.35

      2.35

      Inconloy A-286 Physical Properties:

      Density
      g/cm3

      Melting point

      Thermal conductivity
      λ/(W/m•℃)

      Specific heat capacity
      J/kg•℃

      Elastic Modulus
      GPa

      Shear modulus
      GPa

      Resistivity
      μΩ•m

      Poisson's ratio

      Linear expansion coefficient
      a/10-6℃-1

      7.99

      1364
      1424

      14.2(100℃)




      0.914


      15.7(20~100℃)

      Inconloy A-286 mechanical properties: (at 20 ℃ to detect the minimum mechanical properties)


      Heat treatment methods

      Tensile strength σb / MPa

      Yield strength σp0.2 / MPa

      Elongation rate σ5 /%

      Brinell hardness HBS

      Solution treatment

      930

      590

      15

      ≤341

      Inconloy A-286 Production Executive Standard:

      Standard

      Bar

      Forgings

      Plate (with) material

      Wire

      Pipe

      American Society for Testing and Materials


      ASTM B564

      ASTM B670
      ASTM B906



      American Aerospace Materials Technical Specification


      AMS 5731
      AMS 5732
      AMS 5734
      AMS 5737
      AMS 5895

      AMS 5525
      AMS 5858


      AMS 5589
      AMS 5590

      American Society of Mechanical Engineers

















      Inconloy A-286 Metallography:
      In the standard heat treatment, the alloy possesses spherical and uniform interstitial Ni3 (Ti, Al) -type γ 'phase and TiN and TiC on the γ matrix with a small amount of M3B2 in the grain boundaries. There may be a small amount of η phase and L phase.
      Inconloy A-286 Process Performance and Requirements:
      1, the alloy has good malleability, forging heating temperature 1140 ℃, final forging 900 ℃.
      2, the average grain size of the alloy and forging deformation degree, the final forging temperature is closely related.
      3, the alloy has a satisfactory welding performance. The alloy is soldered in the solution state and the aging is performed after welding.

    5. Previous product:None
    6. Next product:None
    7. Return to
    8.  
      News Center
      Customer Service
      Copyright © Danyang Hualong Special Steel Co., Ltd. - All rights reserved
      日韩无码黄色网址_国产午夜在线网站_亚洲欧美精品一级免费看_中文字幕亚洲第一
        1. <blockquote id="se4ra"></blockquote>
        2. <source id="se4ra"></source>
        3. <var id="se4ra"></var>